Carbide Grit
 |
US $.99
 |
Porter-Cable 18030 24 Grit Carbide Disc (for Model 7403P) List Price: $12.14 Sale Price: $7.70  |
 |
LENOX 29966-66CG 4-1/8" Carbide Grit Hole Saw List Price: $74.20 Sale Price: $36.99 |
|
The Lenox Tools Master-Grit Carbide Grit Hole Saws are best for cutting Abrasive Materials. The Master-Grit hole saws will work great for materials like brick and tile and will work in materials like Cast Iron and Cement Board... |
 |
POWERTEC Wet or Dry Sandpaper Sheets, 9 " x 11 " 1000 Grit, Silicon Carbide, 5/PK - New Sale Price: $3.50 |
|
Wet or Dry Sandpaper Sheets, 9 " x 11 " 1000 Grit, Silicon Carbide, 5/PK - New Sanding of finishes or working with precious metals becomes less of a chore when you choose POWERTEC's silicon carbide sheets for wet or dry use. |
 |
Wet or Dry Sandpaper Sheets, Silicon Carbide, 9" by 11", 1000 Grit, Pack of 50. Sale Price: $14.95 |
|
Premium quality wet or dry silicon carbide 9" by 11" sandpaper sheets. |
|
Wet or Dry Sandpaper Sheets, Silicon Carbide, 9" by 11", 400 Grit, Pack of 50. Sale Price: $14.95 |
|
Premium quality wet or dry silicon carbide 9" by 11" sandpaper sheets. |
|
POWERTEC Wet or Dry Sandpaper Sheets, 9 " x 11 " 2000 Grit, Silicon Carbide, 5/PK - New Sale Price: $3.50 |
|
Wet or Dry Sandpaper Sheets, 9 " x 11 " 2000 Grit, Silicon Carbide, 5/PK - New Sanding of finishes or working with precious metals becomes less of a chore when you choose POWERTEC's silicon carbide sheets for wet or dry use. |
 |
3M Wetordry 9088NA Sandpaper, 9-Inch x 11-Inch, 5-Sheet, Assorted-Grit List Price: $4.99 Sale Price: $2.50 |
|
The standard for Wet-or-Dry sandpaper, this paper utilizes a silicon carbide abrasive bonded with a waterproof resin to an improved paper backing, resulting in an improved rate of cut, increased abrasive life, increased flexibility, and a uniform, consistent finish... |
 |
Norton Sandwet Job Pack Abrasive Sheet, Paper Backing, Silicon Carbide, Waterproof, Grit 220 (Pack of 25) Sale Price: $14.99 |
|
Norton Sandwet abrasive sheets have aggressive silicon carbide abrasive grit and a strong resin bond for hand and jitterbug sanding on wood, when wet, oiled, or dry. This sheet is suitable for sanding primer, sealer, varnish, and other topcoats... |
 |
Lenox Tools 2996464CG Master-Grit Carbide Grit Hole Saw, 4-Inch or 102mm List Price: $89.93 Sale Price: $35.99 |
|
The Lenox Tools Master-Grit Carbide Grit Hole Saws are best for cutting Abrasive Materials. The Master-Grit hole saws will work great for materials like brick and tile and will work in materials like Cast Iron and Cement Board... |
 |
Proxxon 28579 180-Grit Silicon Carbide Sanding Belts for BSL 115/E, 2 Pack (5 pieces per package) List Price: $14.55 Sale Price: $7.00 |
how do you polish french polish?
I sprayed shellac on to a coffee table, and have rubbed it back with a 800 grit silicon carbide paper. would like to find out best way to bring out the gloss.
French Polish is a technique where you apply a mixture of Shellac and Parrafin oil to wood using a pad made of cotton rags. You first fold one rag into a tight square bundle then you wrap it with another rag. You dip this into the shellac oil mix then start applying it in a circular motion. When it starts to get sticky you add a little more pure parrafin oil to the pad and continue rubbing. After it is allowed to dry for a while you rub it out with a slurry of pumice and parrafin oil, or for even better results you can use Car Polish. The trick is to use a super fine abrasive that will leave a very smooth surface. There is more than just my brief description involved in producing a true french polish, so if you want to do it right I would reccomend the Taunton Press book "finishing", it contains all the information that you will need.
