Dewalt Type
 |
 G09 Brush Set Dewalt DW705 DW708 Type 1 3 Miter Saws  US $7.45
|
 50 MIXED BOSCH fit JIGSAW BLADES 5 TYPES DEWALT US $17.01
|
 DeWalt DW708 Type 4 REPLACEMENT MOTOR BRUSH 381028 10 US $9.95
|
 DEWALT RECIPROCATING SAW DC385 Type 2 W Nano Base NEW US $90.00
|
 DEWALT DW680 25MM PLANNER TYPE 1 US $9.99
|
 DEWALT 18Volt Battery XRP DC9096 Type 1 US $.99
|
 DEWALT DW268 HD VERSA CLUTCH 65 AMP SCREWDRIVER TYPE 2 US $39.99
|
 DEWALT DW268 HD VERSA CLUTCH 65 AMP SCREWDRIVER TYPE 3 US $39.99
|
 NEW DEWALT TYPE 2 BATTERY RECIPROCATING SAW DC385 US $40.00
|
 |
DEWALT D518005 Framing Nailer O-Ring Kit (Type 2) List Price: $25.43 Sale Price: $16.41  |
 |
4-1/2" x .045" x 7/8" Metalthincut-off Wheel Type-1 (115-DW8062) Category: Angle Grinder Parts and Accessories List Price: $50.25 Sale Price: $34.50 |
|
Item #: 115-DW8062. 2 full sheets of fiberglass for durability and safetyProprietary material mix to ensure premium cutting speedPremium resin bonds are 100% inspected before use for product consistency and quality Abrasive Diameter = 4 1/2 inArbor Diameter = 7/8 inBristle Thickness = 0... |
 |
Technology and Canadian printing: A history from lead type to lasers (Collection transformation) |
 |
DEWALT D284931 Heavy-Duty 7-Inch Guard for Large Angle Grinder (Type 1 cutting wheels) List Price: $85.01 Sale Price: $59.50 |
|
7" Guard for Large Angle Grinder (Type 1 cutting wheels) |
|
DEWALT D518003 Framing Nailer Bumper Kit (Type 1 & Type 2A) List Price: $38.19 Sale Price: $20.26 |
 |
DEWALT D284937 Heavy-Duty 7-Inch Guard for Large Angle Grinder (Type 27 grinding wheels) List Price: $21.25 Sale Price: $17.28 |
|
7" Guard for Large Angle Grinder (Type 27 grinding wheels) |
 |
DeWalt DW8424 4-1/2-inch Type 27 Thin Cutting Wheel List Price: $2.15 Sale Price: $1.59 |
 |
DEWALT D284939 Heavy-Duty 9-Inch Guard for Large Angle Grinder (Type 27 grinding wheels) List Price: $21.25 Sale Price: $13.62 |
|
9" Guard for Large Angle Grinder (Type 27 grinding wheels) |
 |
DEWALT D284938 Heavy-Duty 9-Inch Guard for Large Angle Grinder (Type 28 grinding wheels) List Price: $31.88 Sale Price: $26.49 |
|
9" Guard for Large Angle Grinder (Type 28 grinding wheels) |
|
DEWALT DW8340 Heavy Duty 7-Inch by 7/8-Inch 24g type 29 HP flap disc List Price: $16.38 Sale Price: $11.96 |
|
7" x 7/8" 24g type 29 HP flap discApplications:Weld blending, removing weld slagDeburringSurface finishing and preparationEdge blending and chamferingFeatures:Zirconia grit enables 3X faster material removal than fiber resin metal sanding discsPremium abrasive cloth provides up to 15 X longer life than fiber resin metal sanding discsType 29 fiberglass backing provides grinding angle of 20-25 degrees |
Cutting through Carbon Steel Alloy with DeWalt Cut Off Tool?
I have a DeWalt DC410KA cut Off Tool and I need to cut through some 3/4" think carbon steel alloy rods. What type or brand of cut off disc should I use? Is the General Purpose disc going to be up to the task? Thanks.
You said some rods. You didn't say how many. A Cut Off Tool will do it with any of the disc that fits the tool, but you are getting into some tuff work there if you have many at all to cut.
Unless you order the disc from somewhere like Harbor Frieght in packs of ten, the disc will cost you an arm and a leg They wear out really fast and especially on something 3/4" thick.
It would be better for you to find a good small welding/machine shop and have them cut them for you on the Band Saw. They could cut 10 or 15 while you are trying to get one cut with the cut off tool.
I do things the hard way too, but not when I have a choise in the matter.
They will probably make each cut fot a buck and you will spend 2 or 3 bucks per cut fro the disc.
Hope this helps you out.
