Dewalt Type
 |
 NEW DEWALT TYPE 2 BATTERY RECIPROCATING SAW DC385  US $84.99
|
 50 MIXED BOSCH fit JIGSAW BLADES 5 TYPES DEWALT US $14.29
|
 DeWalt DC385 Type 2 Battery op Reciprocating Saw 18V US $51.00
|
 Dewalt 18V Reciprocating Saw DC385 NEW TYPE 2 US $86.95
|
 G09 Brush Set Dewalt DW705 DW708 Type 1 3 Miter Saws US $6.45
|
 NEW DEWALT TYPE 2 18V BATTERY RECIPROCATING SAW DC385 US $84.99
|
 NEW DEWALT TYPE 2 18V BATTERY RECIPROCATING SAW DC385 US $32.00
|
 COLLETDEWALT DW 610 ROUTERTYPE 1 COLLET1 43 81 2 US $9.95
|
 DeWalt DC385 Reciprocating Saw Bade Type II New US $69.95
|
 |
DEWALT D518003 Framing Nailer Bumper Kit (Type 1 & Type 2A) List Price: $38.19 Sale Price: $22.99  |
 |
4-1/2" x .045" x 7/8" Metalthincut-off Wheel Type-1 (115-DW8062) Category: Angle Grinder Parts and Accessories List Price: $50.25 Sale Price: $29.75 |
|
Item #: 115-DW8062. 2 full sheets of fiberglass for durability and safetyProprietary material mix to ensure premium cutting speedPremium resin bonds are 100% inspected before use for product consistency and quality Abrasive Diameter = 4 1/2 inArbor Diameter = 7/8 inBristle Thickness = 0... |
 |
"ABC Products" Masterhand 14.4V Nickel Cadmium Rechargeable Battery (Slip-In type) Sale Price: $15.67 |
|
Battery type: nickel cadmium ~~ Masterhand drill/tool 14..4 volt battery ~~ Slide in type battery ~~ Battery replaces battery pack 691273 for model 570022 ~~ Use in handmaster battery products. |
 |
DEWALT D284939 Heavy-Duty 9-Inch Guard for Large Angle Grinder (Type 27 grinding wheels) List Price: $21.25 Sale Price: $14.88 |
|
9" Guard for Large Angle Grinder (Type 27 grinding wheels) |
 |
DEWALT D284938 Heavy-Duty 9-Inch Guard for Large Angle Grinder (Type 28 grinding wheels) List Price: $31.88 Sale Price: $21.62 |
|
9" Guard for Large Angle Grinder (Type 28 grinding wheels) |
 |
Technology and Canadian printing: A history from lead type to lasers (Collection transformation) |
Cutting through Carbon Steel Alloy with DeWalt Cut Off Tool?
I have a DeWalt DC410KA cut Off Tool and I need to cut through some 3/4" think carbon steel alloy rods. What type or brand of cut off disc should I use? Is the General Purpose disc going to be up to the task? Thanks.
You said some rods. You didn't say how many. A Cut Off Tool will do it with any of the disc that fits the tool, but you are getting into some tuff work there if you have many at all to cut.
Unless you order the disc from somewhere like Harbor Frieght in packs of ten, the disc will cost you an arm and a leg They wear out really fast and especially on something 3/4" thick.
It would be better for you to find a good small welding/machine shop and have them cut them for you on the Band Saw. They could cut 10 or 15 while you are trying to get one cut with the cut off tool.
I do things the hard way too, but not when I have a choise in the matter.
They will probably make each cut fot a buck and you will spend 2 or 3 bucks per cut fro the disc.
Hope this helps you out.
